Electromagnetic Water Flow Meter 1inch

1inch Water Flow Meter Digital Electromagnetic Water Flow

No obstacle in the pipe, no pressure-loss and lower requirement for straight pipeline.

DN 6 to DN2000 covers a wide range of pipe size. A variety of liners and electrodes are available to satisfy different flow characteristic.

Programmable low frequency square wave field excitation, improving measurement stability and reducing power consumption.

Implementing 16 bits MCU, providing high integration and accuracy; Full-digital processing, high noise resistance and reliable measurement; Flow measurement range up to 1500:1.

High definition LCD display with backlight.

RS485 or RS232 interface supports digital communication.

Intelligent empty pipe detection and electrodes resistance measurement diagnosing empty pipe and electrodes contamination accurately.

Ambient and working Conditions.
Ambient temperature: sensor: -25°C to + 60°C; converter: -25°C to + 60°C.

Relative humidity: 5% to 90%; Fluid conductivity: 5m S/cm

Maximum fluid temperature:-

• Compact type: 60°C
• Remote type: Teflon 150°C
• Neoprene 80°C; 120°C
• Polyurethane 70°C

Working Principles

Measuring Principles The measuring principle of electromagnetic flowmeter is based on the electromagnetic induction law of Farady. The sensor is mainly composed of measuring tube with isolate lining, a pair of electrodes installed by penetration of the measuring tube wall, a pair of coils and iron core to produce working magnetic field. The signal is amplified and treated by the transmitter to realize various display functions.

Product Classification

Electromagnetic flowmeter is composed of sensor and converter. It has two forms: compact-type and remote-type. There are seven kinds of electrode materials and four kinds of lining materials available for sensor.